E|PTS – Production Technologies and Systems for E-Mobility

Flyer

5th and 6th of June 2024 in Bamberg

ABOUT E|PTS

Increasing power consumption, CO₂ reduction, growing urbanization and mobility combined with progressing automation and digitalization – all of these future megatrends are impossible without efficient production technologies and systems. The electrification of powertrains in all kinds of mobility is considered crucial, as the whole mobility sector is facing difficulties resulting from the substitution of conventional propulsion technologies. Besides advancing ideas on the design of new propulsion technologies, the organization of the manufacturing processes and systems is of utmost importance.

The CIRP sponsored Conference on Production Technologies and Systems for E-Mobility offers an outstanding platform for the exchange of experiences from developers, researchers and potential users.
The focus of the conference is set on the presentation of highly innovative products from various industries as well as manufacturing processes and strategies. Additionally there will be an accompanying industrial exhibition poster presentation and an associated program.

Futher information can be found in the Call for Papers . To register or submit a scientific or industrial contribution, please fill out the appropriate forms at the bottom of the page. In case you or your company is interested in supporting the conference via a small sponsorship please reach out to us. Additional information can be found in the Call for Supporters. For detailed information on both conference days take a look at our Program Brochure.

EPTS - Silhouette

TOPICS

Power Electronics Production

  • Automated processes and machinery for the manufacturing of power electronics
  • New joining technologies, e.g. silver sintering, diffusion soldering, transient liquid phase soldering (TLPS), thick wire bonding
  • New material systems, e.g. Cu instead of Al
  • New durability tests, e.g. active power cycling, H3TRB, HTGB / HTGSP
  • Application of mechatronic integrated devices (MID)

Electric Drives Production

  • Automated processes and machinery for the manufacturing of electric drives
  • Alternative motor technologies for EVs, e.g. reluctance motor, PM synchrony
  • Higher system integration, e.g. integrated power electronics, integrated cooling system
  • Alternative winding technologies, e.g. (Continuous-) Hairpin instead of round enameled wire, basket insertion instead of pull-in insertion
  • New joining technologies, e.g. ultrasonic or induction supported instead of hot crimping or laser welding instead of crimping

Production Technologies for Power Supply
& Transfer

  • Automated processes and machinery for the manufacturing of stationary charging systems
  • Technological developments in automated processes for manufacturing of inductive charging systems or dynamic charging systems
  • Automated processes and machinery for the manufacturing of fuel cells and hydrogen storage systems
  • Highly specialized cutting and joining operations for cell production
  • Handling systems for stack components with highest precision and dynamics
  • High quality forming and joining technologies for production of hydrogen storage systems

Lifecycle Assessment

  • Lifecycle Assessment
  • Lifecycle Assessment in production environments and link to absolute sustainability
  • Influencing factors on energy consumption of electric vehicles in all phases of the product lifecycle
  • Optimization potentials in manufacturing processes
  • Integrating the carbon footprint into economic evaluations

Battery Production

  • Automated processes and machinery for the manufacturing of Li-ion batteries and post-lithium material systems
  • New electrolyte systems, e.g. solid instead of liquid
  • New electrode materials, e.g. Si-based instead of Li-or C-based
  • Integration instead of modularization techniques
  • Design for remanufacturing and recycling

Production Systems

  • Systems and machinery for the manufacturing of electrified aviation
  • Systems and machines for the manufacturing of ground-based E-Mobility
  • Systems and machines for the manufacturing of electrified nautical mobility

CONTRIBUTION

Experts of industry and science are invited to present a contribution on the topics listed or on other topics that correspond to the general subject of the conference. Abstracts of about 300 words containing significant facts should be submitted online in English to the conference office containing the following information:

  • Title of the contribution
  • Subject / topic of the contribution
  • 3 – 6 keywords
  • Full name, organization or company, postal and email addresses of all authors

Submitted abstracts will be examined before a full paper (Scientific Contribution) or presentation (Industrial Contribution) can be uploaded.

Application-oriented Contribution

In particular, experts of industry are invited to present an issue within an application-oriented industrial track without the necessity of preparing a fullpaper.

After the acceptance of your abstract, the presentation / slides will be published in the accompanying industrial transcript.

The application-oriented contribution is an ideal platform for exhibitors and non-exhibitors to present technologies.

Scientific Contribution

Before accepting full papers (Scientific Contributions) or presentations (Industrial Contributions), all submitted abstracts will undergo evaluation. Scientific full papers will undergo a rigorous review process before achieving final acceptance. It is intended that the E|PTS proceedings, which will include all scientifically accepted papers, will be submitted for inclusion into IEEE Xplore subject to meeting IEEE Xplore’s scope and quality requirements. The official IEEE template can be used to prepare the paper. Further templates (LaTeX Template and Overleaf Project) can be found at IEEE – Manuscript Templates for Conference Proceedings.

EPTS - Silhouette

VENUE, ACCOMMODATION AND CONFERECE FEE

Venue and Accommodation

E|PTS 2024 will take place at the Congress Centrum Bamberg, Germany.

* Reduced fee for international program committee members, speakers
(including one paper), participating co-authors and university members. Fees
will be charged for additional paper.

** Please note that all fees listed are net prices and are subject to VAT.

*** Free of charge for invited persons.

TABLE TOP EXHIBITION

E|PTS 2024 will be completed by a comprehensive Table Top exhibition. Companies, research institutes and other organizations will be offered the opportunity to present their products and services to all participants. It is a perfect opportunity to meet your target audience. Detailed technical discussions will be guaranteed.

For any further questions regarding E|PTS Table Top Exhibition please contact Benedikt Scheffler (benedikt.scheffler@faps.fau.de)

EPTS - Silhouette

REGISTRATION

Personal Information

Billing Address

Further options

PAPER SUBMISSION

First Author

Content

Conference Chairman

Publication Chairman

Prof. Franke J., Friedrich-Alexander-Universität Erlangen-Nürnberg

Prof. Jung M., Hochschule Bonn-Rhein-Sieg

Local Organizing Committee

Dr. Kühl A., Friedrich-Alexander-Universität Erlangen-Nürnberg

International Program Committee

Prof. Fleischer J., Karlsruhe Institute of Technology

Prof. Biswas W. K., Curtin University

Prof. Mpofu K., Tshwane University of Technology

Prof. Tracht K., University of Bremen

Prof. Ihlenfeldt S., TU Dresden

Prof. Mourtzis D., University of Patras

Prof. Dietrich F., TU Berlin

Prof. Putnik G., University of Minho

Prof. Söderberg R., Chalmers University of Technology

Prof. Ansari F., TU Wien

Prof. Battaïa O., Kedge Business School Bordeaux

Prof. Büchler J.-P., FH Dortmund

Prof. Heimes H., RWTH Aachen University

Prof. Parspour N., University of Stuttgart

Prof. Urban N., Deggendorf Institute of Technology

Prof. Russer P., Technical University of Munich

Prof. Beitinger G., Siemens AG

Prof. Schuh G., e.Volution GmbH

Dr. Goth C., Vitesco Technologies

Prof. Ceglarek D., University of Warwick

Prof. El Mansori M., MSMP Laboratory

Prof. Papakostas N., University College Dublin

Prof. Monostori L., Institute for Computer Science and Control

Prof. Vrabič R., University of Ljubljana

Prof. Nassehi A., University of Bristol

Prof. Thiede S., University of Twente

Prof. Sutherland J.W., Purdue University

Dr. Sakao T., Linköping University

Prof. Schlund S., TU Wien

Prof. Zaeh M., Technical University of Munich

Dr. Hubert M., Valeo eAutomotive Germany GmbH

Prof. Kampker A., RWTH Aachen University

Prof. Daub R., Technical University of Munich

Dr. Risch F., BMW AG

Prof. Dix. M., Fraunhofer IWU

Prof. Schulze J., Fraunhofer IISB

Prof. Hanenkamp N., Friedrich-Alexander-Universität Erlangen-Nürnberg

CONTACT

Organization
Institute for Factory Automation and Production Systems
Fürther Str. 246b
90429 Nürnberg

E-Mail: benedikt.scheffler@faps.fau.de or e-pts@faps.fau.de

www.e-pts.de

Content
Institute for Factory Automation and Production Systems
Fürther Str. 246b
90429 Nürnberg

E-Mail: benedikt.scheffler@faps.fau.de or e-pts@faps.fau.de

www.e-pts.de